Monday 19 May 2014

Double Embossed Thank You card

Double Embossed Thank You card.
This is a really cool technique where you make a frame from 3 layers of the backing card off the SU designer papers (or thin chip board) and this frame replaces on of the cutting pads when you put your chosen embossing folder through the Big Shot machine. You will under stand soon. Lets get started.

Stampin'Up Product list and codes
  • 101179 Classic Stampin' Pad Basic black
  • 122938 Classic Stampin' Pad Pool Party
  • 122937 Classic Stampin' Pad Island Indigo
  • 126950  Classic Stampin' Pad Rich Razzleberry
  • 124390 A4 Card Stock Island Indigo Scraps
  • 119981 A4 Card Stock Rich Razzleberry Scraps
  • 124391 A4 Card Stock Pool Party A5 piece plus scraps
  • 126422 Blooming with Kindness stamp set 
  • 113439 Big Shot Machine
  • 129381 Framelits Oval Collection
  • 116824 Petals-a-plenty Embossing folder
  • 132076 Stippled Blossoms stamp set
  • 128610(w) 122847(c) Hello Doily  (Soon to be deleted) Noooo!!! don't miss out on this one.
  • 123130 Embossing Folder Designer Frames (Soon to be deleted)
  • 119858 Punch BoHo blossoms
  • 126199 Stampin' Pierce Mat
  • 125624 Simply scored stylus from scoring tool
  • 114511 Little Leaves Sizzilits (Soon to be deleted)
  • 119247 Jewel Basic Pearls
  • 120998 Seam binding ribbon Very Vanilla. (Soon to be deleted) Nooo!! Hope just re packaging
  • My home made bow maker.

 To cut the frame I used Framelits Oval Collection and the chip board. I stacked 3 pieces together and fed it through my Big Shot machine with all the tabs and both cutting board. WARNING you may have to put it through without the top tab if your chip board is thick...proceed with caution.OR you can do 2 layers of chip board then use the one with the hole cut  as the top layer to line up the die for the 3rd layer. I say this because when you put it through your Big Shot it will only cut the top layer but it embosses the 2nd layer so that you get the die in the right place on the next pass through the machine to cut. Proceed until you have 3 layers with the hole cut in the same place. Then glue these together. You will need both the frame and the cut out.
 I then placed my whisper white card (A6) into the Petals-a-plenty Embossing folder and lay the frame over it. Lining it up where I wanted the flat area to be on my card face. I then fed it through my Big Shot machine with all the tabs and only one cutting plate.
My embossed piece looks like this... but that's not all now we do the double part of it.

I took the Embossing Folder Designer Frames (Soon to be deleted) sooooo sad. and position it over the flat area on my card. I placed the oval cut out over the area on the embossing folder and sent it through my big shot to get this.... WOW.

I then stamped my message.
Cut my leaves with Little Leaves Sizzilits (Soon to be deleted)
Stamped them with the Hello Doily stamp and  Pool Party Ink
Punched out BoHo blossoms from Rich Razzleberry and Island Indigo Card stock.
 I then stamped these punched flowers with stipple blossom (the small flower stamp) using Island Indigo Ink
Then I shaped them using Simply scored stylus from scoring tool and Stampin' Pierce Mat. Then added Jewel Basic Pearl.
 I used the Seam binding ribbon Very Vanilla to make a bow which I had coloured with Rich Razzleberry Ink as shown in a previous blog.
I worked out my placement then glued it all in place.
Check back soon. Keep on Stampin'  
Wendy

Friday 16 May 2014

Stampin'Up Stipple Blossom Card

Looks Like Tapestry Card
This is a really cool technique where you stamp a background then emboss it...I've used stipple Blossom stamp set and the SU Square Lattice Embossing Folder. Another quick and easy card. Lets get started...
Here is the Product list (all things available through me. Here is my email address doubleu60@gmail.com)
  • 106552 A4 card stock Sahara Sand A6 piece.
  • 131290 A4 card stock Pear Pizzazz A6 piece plus scrap
  • 108610 A4 card stock Always Artichoke A5 piece plus scrap
  • 106549 A4 card stock Whisper White just a scrap
  • 122939 Classic Stampin' pad Calypso Coral
  • 131176 Classic Stampin' pad Chrisp Cantaloupe
  • 105219 Classic Stampin' pad Always Artichoke
  • 119784 Classic Stampin' pad Pear Pizzazz
  • 119976 Embossing Folder Square Lattice (Soon to be deleted)
  • 126422 (c) Blooming with Kindness Stamp set (Soon to be deleted)
  • 126747 (c) Stipple Blossom stamp set
  • 120999 Seam binding Ribbon Very Vanilla (Soon to be deleted)
  • 119860 Punch 1-3/8" Circle
  • 118874 Punch 2-3/8" Scallop Circle
  • 119854 Punch 1-3/4" Scallop Circle
  • 118138 Beautiful Wings Embosslits (Soon to be deleted)
  • 113439 Big Shot- Die Cutting Machine.
  • 110755 Multipurpose Liquid Glue
  • 103683 Glue Dots
My Home made bow maker.
 I inked the Beautiful Wings Embosslits with Pear Pizzazz then placed my scrap of Whisper white in and sent it through my Big Shot Machine to cut emboss and colour all in one pass.

 Then I stamped my piece of Sahara Sand card stock using the Stipple Blossom stamp set and Calypso Coral and Chrisp Cantaloupe ink pads. See previous post for more details.
 I then stamped the leaves in Always Artichoke and Pear Pizzazz Ink. Make sure you mask so the come from under the stamped flower.

 Now I'm ready to emboss with the Embossing Folder Square Lattice through my Big Shot...

 Wow it looks like Tapestry.
My card base is Always Artichoke card stock with a mat of the Pear Pizzazz. Then I coloured a piece of my seam binding ribbon to match.
I used my bow maker to make a double loop bow. I punched my circles using the punches listed above.

 I layered them all together with  Multipurpose Liquid Glue and glue dots for the bow and butterflies. I stamped a message with Always Artichoke Ink.
All done. Thanks for following. Keep on Stampin' 
Wendy

Monday 12 May 2014

Perfect Polkadot Partial embossing

Perfect Polkadot Cards.
In this tutorial you will learn to only partially emboss the face of your card. Love this technique...the next blog post I will build on this technique and do double embossing. You will also learn about inking the die. Lets get started.

The Product list.
  • Perfect Polka Dots Embossing Folder 118138
  • VersaMark 102283
  • Jewels Basic Pearls 119247
  • Mini Glue Dots 103683
  • Embossing Buddy 103083
  • Stampin' Emboss Powder White 109132
  • Big Shot Die-Cutting Machine 113439
  • Heat Tool 129056
  • Field Flowers 122762 (words on my card) (Soon to be deleted)
  • Embosslits Beautiful Wings 118138 (Soon to be deleted) Noooo!!
  • A4 Wild Wasabi card stock 111850 A6 piece
  • A4 Whisper white card stock 106549 A plus scrap
I made up a chip board wedge using the card from the back of the dsp paper packs. Approx 3 layers
Also for the Button card
      • A4 card stock Soft Suede 119982 Scrap 2" square
      • A4 card stock Crumb Cake 121685 A6 piece
      • A4 card stock Early Espresso 121686  A5.
      • Early Espresso Classic Stampin' pad 126974
      • Embosslits Sweet Buttons 121813 (Soon to be deleted) Nooo!!
      • Perfectly Penned stamp set 122982 (Soon to be deleted)
      • Clear-mount Block pg 196 of catalogue
      • Top Notes Bigz Die 113463
      • Big Shot Die-Cutting Machine113439

      Love the buttons they look soooo real!
       I also love the  Beautiful Wings Emsosslits because it cuts and embosses at the same time... the 5 butterflies you see below. I cut this through my big shot machine.
       I embossed just the top section of my Wild Wasabi card stock by placing my chipboard triangle over the top section only and feeding it through my Big Shot machine with all the tabs and one clear cutting pad.
      I then swiped over my card face with the Embossing Buddy then stamped my chosen words(Field Flowers Stamp set) with versamark ink and sprinkled White embossing powder over the area, shake off the excess and heated with the Heat Tool. I glued the butterflies on with mini glue dots then added  Jewels Basic Pearls. I then mount this onto the Whisper White card base. And it's done.

      Now for the button one...
       I inked the die with Earky Espresso ink then placed my piece of card stock Soft Suede into the die and sent it through the Big Shot machine...it cut embossed and coloured with one pass through. Sooo cool!
       I cut my card stock Crumb Cake with the  Top Notes Bigz Die through the Big Shot machine. I love the little faux stiched edge this die applies.
      I then used my chipboard triangle to emboss only the top section of my cut card (refer above)

      I then stamped my greeting using the Perfectly Penned stamp set and Early Espresso Classic Stampin' pad. I used mini glue dots to apply the buttons onto the card face. And I'm done. So fast. Check back soon. Keep on stampin' ...Wendy

      Friday 9 May 2014

      Six-Sided Sampler Ink Blending

      Six-Sided Sampler My Friend Card
      I did a few different versions of this card.The technique is colour blending directly on the stamp. It is a very easy card to make. Needed and easy one after my Mini Album posts. Next I want to try one in black and white for a men's card. This has huge potential.  Lets get started.
      List of Product used.
      • Stampin'up Classic Stamp Pad Bermuda Bay 131171
      • Stampin'up Classic Stamp Pad Pear Pizzazz 131290
      • Stampin'up Classic Stamp Basic Black 126980
      • A4 Card stock Pear Pizzazz 119784
      • A4 Card stock Bermuda Bay 131286
      • A4 Card stock Whisper White 106549
      • Sponge Daubers 102892 (Soon to be deleted)
      • Six-Sided Sampler stamp set (W) 130953 (c) 130956
      • Hexagon Punch 102892
      •  Seam Binding Ribbon Very Vanilla (Soon to be deleted)
      • Multi purpose liquid glue 110755
      • Glue Dots 103683
      Also For the "Warmest Wishes Card"
      • Stampin'up Classic Stamp Pad Rich Razzleberry 115658
      • Stampin'up Classic Stamp Pad Melon Mambo 115656
      • A4 Card stock Rich Razzleberry 119981
      • Blooming With Kindness Stamp set (Soon to be deleted)
      • my home made bow maker

         I used an A5 piece of Pear Pizzazz card and an A6 piece of Bermuda Bay card.
         I inked the stamp with the two shades of ink and stamped them onto whisper white.
         I punched them out with the Hexagon punch.

         I then inked around each piece with the Sponge Dauber and Bermuda Bay Ink.
         I then lined my hexagons up right on the edge of my piece of card and glued them in place with Multi purpose liquid glue. Then cut away as shown in the photo.
        I then stamped my chosen message with  Basic Black Ink.

         And that quickly ...it's done.

        Another colour pallet
         I coloured some seam binding ribbon with the Rich Razzleberry Ink
         I added a bow to this one. (I will do a video on how I did this bow.) I used a glue dot to attach it to my card.
        And here they are. Love the double ink colour on the stamp. Any product featured that you just can't live without order it in an email to me. Thanks for following and keep on Stampin'. Over and Out for Now Wendy